
一片裹包式自動裝箱機:適用于食品、飲料、醫藥、等箱子包裝行業自動開箱裝箱封箱一體機
產品介紹:
product introduction:
1、采用單張紙板進行裹包裝箱,削減制箱、開箱環節,節約了制箱、開箱設備成本;
Adopt to put single paper sheet into box,reduce two steps (make and out the box),save the cost;
2、與傳統紙箱相比,可節約20%左右的紙箱面積,節約了原材料成本;
Compared with the traditional paper box,it can save the area about 20%,in the same ,saved the
materials cost;
3、根據客戶裝箱排列需求,自動對產品進行排列組合;
According to the demand of the clients,it can arrange and
combination automatic;
4、適用范圍廣,可知足多種規格產品裝箱;
Wide range of application,It can meet each specification
encasemen;
5、采用美國諾信熱熔膠機進行噴膠封箱,保證了封箱粘接穩固性,降低
因熱熔膠機質量題目導致停機征象;
It adopts the united states nordson hot melt glue machine
to seal box. guarantee the stability of sealing adhesive,
reduce the time phenomenon caused by hot melt adhesive machine
quality problems;
6、控制體例:PLC+觸摸屏+標準控制按鈕+旌旗燈號開關,分自動/手動控制模式;
control way :PLC+ frequency converter+ touch Screen+ Standard
control button+signaling switch ,divide automatic / hand movement
hand movement;
7、可以通過觸摸屏找到故障點,輕松排除故障;
You can find the fault point via the touch screen,and solve
the fault relaxed;
8、本機適用于啤酒、白酒、飲料、條煙、肥皂、方便面等行業。
It can used in beer, liqueur,drink, cigarette,soap,
instant noodles etc industry
產品參數:
適用紙箱:L250-400*W300-450*H150-300mm
裝箱速度:700-900箱/小時
臺面高度:750mm
耗 膠 量:≤4g/每箱
熔膠速度:170℃±5℃
固化時間:1.5S-2.5S
使用電源:380V,50/60Hz
使用氣源:5-6kg/cm2 500L/min
機械尺寸:(L)6000(W)2200(H)1900mm
機械重量:1200kg
Technical data:
Application box: L250-400*W300-450*
H150-300mm
Encasement speed:700-900 box/hour
Table-board height: 750mm
rubber consumption: ≤4g/box
Speed of sol: 170℃±5℃
curing time: 1.5S-2.5S
Power supply: 380V,50/60Hz
Air supply: 5-6kg/cm2 500L/min
Machine size: (L)6000(W)2200(H)1900mm
Machine weight: 1200kg