硅橡膠預制式、冷縮式電纜附件
Silicon rubber precast、Cold shrinkable cable accessory
型號說明 Type Designation Breadown
例：WLS-15/1.1，表示15kV全冷縮型硅橡膠電纜戶外終端，適用25mm
2-50mm
2的電纜
For example:WLS-15/3.1,means 15kV full cold shrinkage silicon rubber cable outdoor terminal,fit to three-core cable with 25-50mm
2.
冷縮電纜附件采用進口LSR硅橡膠材料制造而成，不但具有十分優良的電氣性能，且具有優異的憎水性，高彈性，長壽命等物理特性，產品的過盈設計，恒定的縮壓力與電纜本體辶間保持緊密關系的結合，防水性。特別適用范圍高溫，寒冷，鹽霧，潮濕，嚴重污染環境。
冷縮電纜附件省去了熱縮產品所采用火焰加熱的麻煩和不安全因素。針對冷縮產品而言，冷縮電纜附件使用擴張支撐原理，取出支撐物就能自動收縮復位，不需加熱故稱之為冷縮，使用非常方便。
Cold shrinkage cable accessory is made by imported LSR silicon rubber material ,that not only has good electric performance ,but has lots of physical feature as excellent adding water performance ,high spring and long service life and so on .The design ,constant shrinkage press of the product keep close combination with cable body and has good waterproof performance ,it is especially suitable for using in environment with high temperature ,cold ,salt fog ,moisture wet and heavy pollution .
The cold shrinkage cable accessory has omitted the trouble problem and unsafe factor due to the thermal shrinkage product using fire to heat .Comparing with the thermal shrinkage products ,the cold shrinkage cable accessory adopts support principle to take out the support ,then it will auto shrink and reset ,ａnd does not need heat so it is called shrinkage ,It is very easy to use .
絕緣可靠 Reliable insulation
利用特制硅橡膠優良的絕緣性和高彈性，安裝后給電纜適當的徑向壓力，保持與電纜同“呼吸"，使內界面結合緊密；應力控制部分與主絕緣部分復合成一體，有效的解決了電纜半導電層屏蔽切斷處的電場集中問題，從而確保絕緣可靠，運行穩定。
Make use of insulated and elasticity of silicon rubber .Add the radial stress to the cable after Install ,keep "breath " with cable in order to tighted inner layer .The parts of stress control and main insulation are compounded together .Solving the problem of power fields collection ,for the cable screen discontinue position and ensured the reliable insulation ,stability running .
