TM3000E/TM2480E 底加溫真空覆膜機
TM3000E/TM2480E 底加溫真空覆膜機
特征
本機工作臺為手動運行，加溫倉固定不動，可減少熱量損耗，電器故障。
真空控制使用電接點真空表，自動控制真空氣壓。微電腦溫度控制儀，自動搜索溫度變化速度，從而調整加熱速度，以達到精確控制溫度的目的。
本機采用國內直聯真空泵，噪音小，抽氣速度快。
Features：
The working table of this machine is operated manually and the warming warehouse is fixed, which can reduce heat loss and electrical failure.
Vacuum control uses electric contact vacuum meter to automatically control vacuum pressure. Microcomputer temperature controller automatically searches for the speed of temperature change, so as to adjust the heating speed, in order to achieve the purpose of precise temperature control.
This machine adopts the domestic top direct vacuum pump, with low noise and high pumping speed.
適用范圍：
可將各種PVC膜貼覆于家具、櫥柜、音響、工藝門、裝飾墻裙板等各種板式家具上，并可在家裝硅膠板后用于熱轉印膜和單面木皮的貼覆工作。
Scope of application:
All kinds of PVC film can be applied to furniture, cabinets, audio, craft doors, decorative wall skirt panels and other board furniture. It can also be used for thermal transfer film and single-sided veneer lamination after installing silica gel board at home.
技術參數 TM3000E/TM2480E 底加溫真空覆膜機
外形尺寸 8800/5800/1500/1400mm
工作臺尺寸 2550/1150/1300mm（內徑innersize）
加工高度 50mm
額定工作壓力 負壓≥-0.095Mpa
總功率 15KW
實際耗電 約5KW
整機重量 約1.8T
