CKD方向切換閥用途,喜開理方向切換閥材質
外部先導（K）型的先導空氣排氣為個別排氣規格。先導空氣的
給氣口為??6快插接頭，請勿弄錯配管連接的位置。配管必須正
確，否則會導致動作不良。
• The main pressure (P) should be lower than the pilot pressure (PA).
Please note that the main pressure (P gas) can not be less than 0.2MPa.
Manual devices are unlocked and locked. In the depressed state, the lock is locked
on. Need to lock the occasion, must be pressed down. Do not lose this will turn loss
Bad manual device, and become the cause of air leakage and other causes.
外部先導（K）型的先導空氣排氣為個別排氣規格。先導空氣的
給氣、排氣氣口都為M5螺紋氣口，請注意不要搞錯配管連接位
置。必須正確配管，否則會導致動作不良。
4G系列為內部先導式電磁閥。若不向P氣口供給空氣，即使操
作手動裝置，主閥也不進行切換。
手動保護蓋為標準裝備。手動保護蓋在關閉狀態下出廠，交貨
時看不見受保護的手動裝置。請打開保護蓋后，進行手動操作。
CKD方向切換閥用途,喜開理方向切換閥材質
External pilot (K) type pilot air exhaust for individual exhaust specifications. Pilot air
Do not mistake the piping connection. Piping must be positive
Indeed, otherwise it will lead to poor action.
4G series for the internal pilot solenoid valve.
If you do not supply air to the P port, even if the operation
For manual devices, the main valve is not switched.
·請注意主壓力（P氣口）不可低于0.2MPa。
手動裝置為非鎖定式和鎖定式通用。在壓下的狀態下回轉即鎖
上。需要鎖定的場合，必須壓下回轉。不壓下就這樣回轉會損
壞手動裝置，并成為造成空氣泄漏等事故的原因。????
Manual protective cover for standard equipment.
Manual protection cover in the closed state of the factory, delivery
Can not see the protected manual device.
Please open the protective cover and perform manual operation.
External pilot (K) type pilot air exhaust for individual exhaust specifications. Pilot air
To the gas, the exhaust port is M5 threaded port,
please be careful not to make the wrong pipe connection bit
Set. Must be properly piped, otherwise it will lead to poor action.
Also, be aware that the mechanism for closing the protective cover after manual unlocking.
3-way valve 2 built-in type, through the main (P gas) supply pressure to the valve body action.
QQ交談
