QY100-1北京干式恒溫器價格
【簡單介紹】
【詳細說明】
QY100-1干式恒溫器 產品報價:
Dry QY100-1 thermostat products quotation:
QY100-1干式恒溫器產品介紹:
QY100-1干式恒溫器是采用微電腦控制的恒溫金屬浴裝置,利于高純鋁材料做為導熱介質,以替代傳統的水浴裝置,具有控溫精度高,制樣平行性好等優點,可廣泛應用于樣品的保存和反應、DNA擴增和電泳的預變性、血清凝固等。
Dry QY100-1 thermostat product introduction:
Dry QY100-1 thermostat thermostat metal bath device is controlled by microcomputer, as a heat conduction medium for high purity aluminium material, to replace the traditional water bath device, with high precision temperature control, sample preparation as well as good parallelism, can be widely used in the sample preservation and reaction of DNA amplification and electrophoresis, and degeneration, serum solidification, etc.
QY100-1干式恒溫器主要特點:
1、便捷的模塊更換,便于清潔與消毒
2、干式恒溫器的內置超溫保護裝置
3、溫度偏差校準功能
4、自動故障檢測及蜂鳴器報警功能
5、LED顯示屏,即時溫度現實、時間遞減顯示。
6、多種模塊選擇,更換,便于清潔與消毒食用各種試管
Dry type thermostat QY100-1 key features:
1, convenient module replacement, to facilitate cleaning and sanitation
2, dry thermostat's built-in overtemperature protection device
3, temperature deviation calibration function
4, automatic fault detection and buzzer alarm function
5, LED display, real-time temperature diminishing reality, time display.
6, a variety of module selection, replacement, to facilitate cleaning and disinfection of consumption of all kinds of test tubes
QY100-1干式恒溫器技術參數:
1.控溫范圍:室溫+5℃~150℃
2.升溫時間:≤30分鐘(從20℃升至150℃)
3.溫度穩定性@100~150℃:≤±1℃
4.溫度穩定性@40~100℃:≤±0.5℃
5.模塊zui大溫差@40℃:0.3℃
6.模塊溫度均勻性:≤±0.5℃
7.顯示精度:0.1℃
8.時間設置zui長:99h59min
Dry type thermostat QY100-1 technical parameters:
1. The range of temperature control: room temperature + 5 ℃ ~ 150 ℃
2. The heating time: 30 minutes or less (from 20 ℃ to 150 ℃)
3. The temperature stability @ 100 ~ 150 ℃, + / - 1 ℃ or less
4. The temperature stability @ 40 ~ 100 ℃, plus or minus 0.5 ℃ or less
5. @ module maximum temperature difference of 40 ℃, 0.3 ℃
6. The module temperature uniformity: plus or minus 0.5 ℃ or less
7. Display precision: 0.1 ℃
8. Set the longest time: 99 h59min
可選模塊 Optional modules
型號 | 試管直徑 | 試管數 |
MK01 | 10mm | 24 |
MK02 | 12mm | 24 |
MK03 | 13mm | 24 |
MK04 | 15mm | 12 |
MK05 | 16mm | 12 |
MK06 | 19mm | 12 |
MK07 | 20mm | 8 |
MK08 | 26mm | 8 |
MK09 | 1.5ml | 24 |
MK10 | 2.0ml | 24 |
請輸入產品關鍵字:
郵編:201615
聯系人:楊敏華
留言:在線留言
商鋪:http://www.quality123.top/st41169/