BODINE交流調速器2998

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地上海市

在線詢價收藏產品查看聯系電話

化工機械設備網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2024-11-28 17:31:33瀏覽次數：19次

聯系我時，請告知來自化工機械設備網

產品分類 品牌分類

  BODINE減速電機控制器

全部產品列表

暫無信息

上海博長電子有限公司

經營模式：其他

商鋪產品：85條

所在地區：

詢價 給他留言

產品簡介

SPECIFICATIONSMotorHPUpTo1PhasesInput:Single-phase115Or208/230VAC,50/60Hz

詳細介紹

SPECIFICATIONS

Motor HP	Up To 1
Phases	Input: Single-phase 115 Or 208/230 VAC, 50/60Hz. Output: 3-phase, 230 VAC (50Hz Or 60Hz, Selectable)
Output Volts	0 To 230
Output Amps	3.6 Max
Output Hz	0 To 120
Input Volts	115 Or 208/230
Input Hz	50/60
Dimensions (inches; W X H X D)	5 X 7 X 4.2
Weight (lbs)	2.5
HPDecimal	1.0

STANDARD FEATURES

Simple to operate. Does not require programming. Uses trimpots and jumpers, which are factory set for most applications.
Motor horsepower selection jumper allows the drive to be used on a wide range of motor HP.
Diagnostic LEDs. PC board mounted LEDs for power on, drive status, and overload.
Run/Fault relay output contacts turn equipment on/off and signal stop mode if a fault has occurred.
Barrier terminal blocks facilitate wiring.
Jumper selection of drive output frequency increases the motor speed up to two times the rated RPM.
Motor overload (I2t) with RMS current limit prevents motor burnout and nuisance trips.
Electronic inrush current limit eliminates harmful inrush AC line current during startup.
Short Circuit. Shuts down the drive if a short circuit occurs at the motor (phase-to-phase).
Regeneration eliminates tripping due to bus overvoltage.
Overvoltage and undervoltage shuts down the drive if the AC line input voltage goes above or below the operating range.
On/Off Switch, Speed Pot, F-S-R Switch installed in front panel for easy access.
Built-in line filter for CE compliance.
cULus, RoHS, CE.
Extended 2-year system warranty when a Bodine gearmotor/motor and control are purchased together.

Application Information
Our PACESETTER™ NEMA-1 / IP-40 AC motor speed control is designed to provide variable speed control for inverter duty rated, 230VAC, three-phase AC induction motors and gearmotors. The control is rated for continuous operation in an up to +40° C ambient and designed for stand-alone operation.
This control is ideal for variable-speed applications such as conveyors, packaging equipment, door and gate openers, and other industrial or commercial equipment.