詳細介紹
DP油封螺桿真空泵
功 率:4~110KW
氣 量:2.2~80m³/min
排氣壓力:
傳動方式:聯軸器傳動
冷卻方式:
油封螺桿真空泵供應廠家
油封螺桿真空泵特點:
低螺桿轉速/Low Rotor Ratation Speed
●保證了DP系列真空泵是極*的產品—產品更低噪音為69dB(A)—所以能夠將真空泵安裝在周圍有操作人員的主設備旁邊。保證了產品的高可靠性與長使用周期/Denair low pressure screw air compressor adopalt ensure DNA-P series vacuum pump is extremely quiet-Produc ts for the lowe st noise 69dB(A)-it can be installed next to the pump around the operator's main device,Ensuring high relibility and long life cycle of the product.ts.high efficient oil-air separation system.Ensuring that the products,of high reliability and long life cycle.oil content of the compressed air under 3 ppm.
通用馬達/General Motor
●DP真空泵的耐用,高可靠性并配置了較高同服系數的電機的特點保證了產品的長壽命/DAN-P vacuum durable.high reliability and comfigured servo motor features high coe fficient of ensuring a long product life.
真空泵進氣口直接安裝的模塊化調節閥/Vacuum Pump Air Inlet Dirctly Mounted Modular Valve
●使設備能夠按照現實的實際需求調節產品表現/It enables the device to adjust according to the actual needs of the product preformance.
●減少了設備運行中的波動對系統的影響/Reduce the impact of fluctuations in the operation of the device on the system.
●通過減少產品的啟/停次數,減少了產品的磨損并縮短了維護周期/By reducing the product starts/stops,re duced wear and shorten product maintenance cycle.
隔音外罩/Soundproof Enclosure
●將噪音水平降至更低69dB(A),優化了產品外觀/The noise levels to a minimum 69dB(A),Optimize the product appearance.
高效油分離器/Efficient Oil Separator
●濾芯極易替換,減少返流并優化產品性能/Filter easily replaced,reducing reflux and optimize.product performance.
●以更少的維護次數保證產品壽命/With minimal maintenance times to ensure product life.
●允許產品在接近大氣壓的氣壓范圍工作,避免安裝額外的附件/Allow product near atmospheric pressure range,acoid installing additional accessories.
可設定式油自動調溫器/Oil Can Be Set Thermostats
●避免了冷凝水、特別是在特定的環境中,污染油箱/Avoiding condensation of water,particularly in a specific environment,pollution tank.
●針對潮濕應用環境優化油的循環減少冷凝水對機頭的影響,提供持續表現/For wet application on the compressor element of condensate,provide continuous performance.
油封螺桿真空泵供應廠家
型號 | 功率 | 抽氣速率 | 壓力 | 電壓防護等級 | 傳動方式 | 潤滑油量 | 啟動方式 | 外形尺寸 | 重量 | 空氣出口管徑 |
---|---|---|---|---|---|---|---|---|---|---|
DP-4/2 | 4 | 2.2 | 0.5/50 | 380V/IP54 | 皮帶 | 10 | ϒ−Δ | 950×950×1100 | 500 | DN50 |
DP-11/7 | 11 | 7.1 | 0.5/50 | 380V/IP54 | 聯軸器傳動 | 25 | 1450×950×1200 | 1000 | DN65 | |
DP-15/9 | 15 | 9.0 | 0.5/50 | 380V/IP54 | 25 | 2300×1300×1600 | 1200 | DN80 | ||
DP-18/12 | 18.5 | 12.0 | 0.5/50 | 380V/IP54 | 50 | 2300×1300×1600 | 1500 | DN80 | ||
DP-22/16 | 22 | 16.0 | 0.5/50 | 380V/IP54 | 50 | 2400×1400×1700 | 1700 | DN100 | ||
DP-30/18 | 30 | 18.0 | 0.5/50 | 380V/IP54 | 50 | 2400×1400×1700 | 2000 | DN100 | ||
DP-37/26 | 37 | 26.0 | 0.5/50 | 380V/IP54 | 80 | 2400×1400×1800 | 2500 | DN100 | ||
DP-55/40 | 55 | 40.0 | 0.5/50 | 380V/IP54 | 100 | 2500×1800×2100 | 3500 | DN150 | ||
DP-75/49 | 75 | 49.0 | 0.5/50 | 380V/IP54 | 120 | 2800×1800×2100 | 4000 | DN150 | ||
DP-90/59 | 90 | 59.0 | 0.5/50 | 380V/IP54 | 140 | 2800×1800×2100 | 4200 | DN200 | ||
DP-110/80 | 110 | 80.0 | 0.5/50 | 380V/IP54 | 160 | 3000×2000×2100 | 4500 | DN200 |