當前位置：北京疏水閥門廠>>疏水閥>>先導活塞倒吊桶式疏水閥-ER84

先導活塞倒吊桶式疏水閥-ER84

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地

在線詢價收藏產品查看聯系電話

化工機械設備網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2021-12-31 09:24:00瀏覽次數：92次

聯系我時，請告知來自化工機械設備網

產品分類 品牌分類

  疏水閥

全部產品列表

暫無信息

北京疏水閥門廠

經營模式：生產廠家

商鋪產品：78條

所在地區：北京北京市

聯系人：祖?zhèn)?（經理）

詢價 給他留言

產品簡介

產品介紹：倒吊桶式蒸汽疏水閥它是利用冷凝水和蒸汽的密度差的工作原理，內部結構是由杠桿系統連接倒吊桶，克服蒸汽壓力開關倒吊桶式疏水閥內部是一個倒吊桶為液位敏感件，倒吊桶開口向下

詳細介紹

產品介紹：

倒吊桶式蒸汽疏水閥它是利用冷凝水和蒸汽的密度差的工作原理，內部結構是由杠桿系統連接倒吊桶，克服蒸汽壓力開關倒吊桶式疏水閥內部是一個倒吊桶為液位敏感件，倒吊桶開口向下。裝置剛起動時，管道內出現空氣和低溫冷凝水，此時疏水閥是全開放，空氣和低溫冷凝水迅速排出，裝置很快提升溫度。當蒸汽進入倒吊桶內，倒吊桶產生向上浮力，倒吊桶連接杠桿帶動閥心關閉閥門。倒吊桶上開有一小孔，能自動排空氣，當一部份蒸汽從小孔排出，另一部份蒸汽產生凝結水，倒吊桶失去浮力向下沉，倒吊桶連接杠桿帶動閥心開啟閥門。當蒸汽再進入倒吊桶內，閥門再關閉，循
環工作，間斷排水
倒吊桶式蒸汽疏水閥是機械型蒸汽疏水閥中堅固的疏水閥之一，它的優點是：不怕水擊，能連續排不冷凝氣體，抗污性能好；背壓≥90%，所有內件都是不銹鋼制造，耐磨損、抗腐蝕；球形閥心和閥座是線接觸，密封性能好，使用壽命長；間斷排水和連續排水，能排接近飽和溫度冷凝水，使加熱設備達到理想工作效率。倒吊桶式蒸汽疏水閥的閥座處于水密封的保護下，工作時無活蒸汽泄漏，節能效果好。
它適用于石油、化工、印刷、造紙、制藥等工業蒸汽加熱設備和蒸汽管網的阻汽排水。

Inverted Bucket Trap

The interior of the inverted bucket steam trap:this valve adopts the operating principles of density difference between condensate water and steam,ａnd the leverage system connects with inverted bucket to form its internal structure,thus controlling the open and close of the steam pressure.The interior of the inverted bucket steam trap is an inverted bucket,a liquid level sensitive part,with the bucket's opening downward.When the device just started,air and low temperature condensate water occur in the pipes,at the moment the steam trap opens thoroughly,the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately.When any steam enters into the inverted bucket,the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve.There is small aperture on the inverted bucket,which can discharge air automatically.As some of steam is discharged from such aperture,while other steam produces condensate water.The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve.When the steam re-enters into the bucket,the valve will close again.It repeats the said procedures to discharge water intermittently.
The inverted bucket steam trap is one of the most solid mechanical steam traps. It has the following advantages: it is not afraid of water hammer, can continuously discharge non condensing gas, and has good anti pollution performance; the maximum back pressure is ≥ 90%, all internal parts are made of stainless steel, wear-resistant and anti-corrosion; the ball valve core and valve seat are in line contact, with good sealing performance and long service life; intermittent drainage and continuous drainage It can discharge condensate close to saturation temperature and make heating equipment reach ideal working efficiency. The valve seat of inverted bucket steam trap is under the protection of water seal, and there is no live steam leakage during operation, so the effect of energy saving is good.
The product applies to such industrial steam heating equipment as petroleum,chemical,printing,paper making and pharmaceuticals and discharge of the steam pipe network.

優點：

1、對凝結水的發生量適應性強，既可間歇排放，又可連續排放。

2、內部裝有大排量的雙閥座差壓機和SCCV關閉系統，體積小而排量大。

3、內部零件全部采用不銹鋼制造，并且安裝在閥蓋上維修保養極為方便。

4、背壓率高（90%）。

5、汽水分離可靠（水汽經U型通道從閥下部進入），閥內始終處于水封狀態，有效阻止蒸汽泄露。

6、敞口型的浮子抗水擊，吊桶上設有排水孔，可有效防止蒸汽氣鎖、空氣氣堵現象（非凝結性的高溫空氣也排除）。

7、與杠桿機構結合制造高壓閥。

Merits

1.Strong adaptability to happening of condensate water,capable of intermittent or continuous discharge.

2.Equipped with double-valve pressure differentiator and SCCV shutdown system,with small size but large discharge capacity.

3.All inner parts made of stainless steel and mounted on valve covers,easy to maintain and repair.

4.High backpressure rate of 90%.

5.Reliable separation of vapor and water (vapor enters from the lower part of the valve through the U-shape passage),the inner part of the valve is in water seal state,which effectively prevents the leakage of steam.

6.Water-resistant open floater with gas vent through the bucket's vent,effective to prevent steam locking or air blocking(except the non-confensed high-temperature air).

7.Suitable to be joined with lever mechanism for producing high-pressure valve.

先導活塞倒吊桶式疏水閥/PISTON INVERTED BUCKET TRAP

技術參數/Technique parameter

殼體壓力等級

Shell

pressure

grade

負荷泄漏率

Load

leakage

使用介質

Used

medium

允許背壓率

Permitted

Backpressure

rate

節能效果

Energy

saving

effect

排空氣裝置

Air

exhaust system

2.5、

4.0、

6.4、

12MPA

≈0%

蒸汽、凝結水

Steam、

Condensate

water

≥90%

優秀

Excellence

自動

Automatic

工作壓差

Maximum

operating

pressure

differential

排出高溫氣體

Discharging

of high-

temperature

air

排水方式

Drainage

method

允許溫度

Maximum

allowable

temperature

抗水擊

Resis

12MPA

適應

Adaption

間接方式

Indirect way

420℃

適應

Adaption

主要零件材料/The materials of primary accessories

零部件名稱

Part and component name

材質

Material

閥體、閥蓋

Valve body、Valve cover

鑄鋼、不銹鋼、合金鋼

Cast-iron、WCB、Stainless steel

吊桶、杠桿

Inverted bucket、Lever

304/316不銹鋼

304/316 Stainless steel

閥座、閥瓣

Valve seat、Valve clack

STL合金、高鉻不銹鋼

STLAlloy、High chrome、stainless steel

過濾網

Filtrating screen

不銹鋼

Stainless steel

外形尺寸和重量/Prime out-form dimensions and weigh

產品型號

Product

model

口徑(DN)

Calibre

L法蘭

Flange

L螺紋/

焊接

Thread/

welding

重量(kg)

weight

使用壓力

范圍(MPa)

Pressure

change

range

公稱壓力

(MPa)

Nominal

pressure

ER84

32-40

310

320

330

245

160

246

205

0.1-2.5·3.2

2.5-4.0

注解：

1、選型時請?zhí)峁┕ぷ鲏毫Α⒐ぷ鲏翰睢⒛Y(jié)水發生量、工作溫度、連接方式及標準。

2、凝結水負荷的安全系數一般為2~3倍

3、正確安裝、定期保養清除閥內污物，保證疏水閥正常工作和延長使用壽命。

4、型號尾數數值相同，其排水量也相同。

Note

1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.

2.The load of condensate water’s safety coefficient reaches 2 to 3 times in general.

3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.

4.The products with same mantissa figure at their models have the same discharge capacity.

其他推薦產品更多>>