1.全自動濾紙式煙度計NTP1-HPC701

全自動濾紙式煙度計NTP1-HPC701主要功能特點：
全自動濾紙式煙度計，用于柴油車自由加速狀態下排煙的煙度測量。自動完成測量全過程，自動顯示1、2、3次測量值及其平均值，高亮度數碼管顯示，附時間顯示，出現故障自動診斷顯示所在單元，可配內置打印機（或數字RS－232A接口或模擬接口）

主要技術參數：

Main Features:

Automatic filter paper-type smoke meter for diesel vehicles free of tobacco smoke accelerate the state measurement. Auto-complete measurement of the whole process automatically 1,2,3 times measured values and their average, high-brightness LED display, with a time display, automatic fault diagnosis shows there where the unit can be equipped with built-in printer (or digital RS-232A interface or analog interface)

Main technical parameters:

Range：0 ~ 10FSN
Indication error：≤ ± 3%
Repeatability：Repeat error ≤ ± 2%
Stability：Zero drift ≤ ± 3%
Exhaust volume sampling system：300 ± 15ml
Tightness：≤ 15ml/min
Effective working diameter of filter paper：30.7mm
Pumping action time：1.4 ± 0.2s
Environmental conditions：Temperature 5 ~ 40 ℃, relative humidity ≤ 90%

Power ：AC220v ± 10% 50Hz Power consumption 150VA
Dimensions： 520mm (length) × 360mm (width) × 200mm (H)
Weight：about 30kg

2.發動機綜合性能檢測儀NTP1-HPC801

NTP1-HPC801 汽柴油發動機綜合檢測儀:

NTP1-HPC801儀器采用全中文漢字顯示,能對各種型號的柴,汽油發動機進行全面不解體檢測和故障診斷可對柴汽油機的啟動電流,電壓,充電電流,電壓,汽缸壓力,點炎提前角,無外載測功.單缸動力,潤滑系統,異常響聲,噴油壓力,白金閉合角,發動機轉速等29項參數進行測量.分析故障原因,測量結果與評價由打印機打印給出.該儀器還有波形顯示功能可直觀地分析各種波型的情況,測試軟件可進行win98及winNT,winXP系統等。

NTP1-HPC801 instrument adopts the whole Chinese characters display, can make various types of wood, gasoline engine to conduct a comprehensive testing and fault diagnosis of non-disintegration of diesel gasoline engine can start current, voltage, charge current, voltage, cylinder pressure, advance angle point of inflammation, no outside the set dynamometer. cylinder power, lubrication system, abnormal noise, injection pressure, platinum closed angle, engine speed and other 29 parameters were measured. analyze cause of the malfunction, the measurement results and evaluation is given by the printer. The instrument is also waveform display features an intuitive analysis of various wave conditions, test software can be win98 and winNT, winXP system.

3. 汽車排氣分析儀NTP1-HPC302

主要功能特點：
　　
   用于測量汽車排放廢氣中的HC、CO、NOx氣體濃度，采用國外*技術，進口關鍵零部件組裝而成。具有高亮度數碼顯示，自動校零，自動數據線性化處理，氣路阻塞時自動報警，故障時自動診斷所在單元，打印測試之日期、時間功能，配內置打印機（或模擬輸出接口或RS－232A數字串行通信接口），可進行自由怠速和雙怠速測量，具有操作方便，測量數據準確，工作穩定可靠等特點。

主要技術參數：
測量范圍              HC：0～10000×10-6（ppm）vol
                      CO: 0～10   ×10-2(%)vol
                      NOx :0～4000 ×10-6（ppm）vol
示值誤差              HC±12  ×10-6（ppm）vol(誤差)或±5%(相對誤差)
                      CO±0.06×10-2(%)vol    (誤差)或±5%(相對誤差)
                      NOx ± 25×10-6（ppm）vol(誤差)或±4%(相對誤差)
重復性                重復誤差≤±2%
分辨率                HC：1×10-6（ppm）vol
                      CO: 0.01×10-2(%) vol
                      NOx:1×10-6（ppm）vol
穩定性                自動校零，量矩漂移≤±3%
預熱時間              8min（可預熱3min應急檢測）
響應時間              95%響應不大于10秒
輸出方式              數字直讀顯示，可附打印機打印氣體名稱，濃度zui大值，測
                      試時間、日期等。可附接口與計算機聯網
環境條件              溫度0～40℃，相對濕度≤90%
電源                  AC100-240V 50Hz 或DC12V（選加電源逆變器）
                      消耗功率50VA
外形尺寸              420mm(長)×310mm(寬)×170mm(高)
重量                  約9KG

Main Features:
Used to measure vehicle emissions of HC, CO, NOx gas concentration, using advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with easy operation, accurate measurement data, work stable and reliable characteristics.

Main technical parameters:
Test Scope：HC：0～10000×10-6（ppm）vol
CO：0～10×10-2(%) vol
NOx：0～4000×10-6（ppm）vol
Shows the value error：HC ± 12×10-6（ppm）vol (absolute error)or± 5% (relative error)
CO± 0.06×10-2(%) vol   (absolute error)or± 5% (relative error)
NOx±25×10-6（ppm）vol  ( absolute error) or ±4%(relative error)
Stability：Automatic zero, volume moments drift ≤ ± 3%
Repeatability：Repeat error ≤ ± 2%
Resolution：HC：1×10-6（ppm）vol
CO：0.01×10-2(%) vol
NOx：1×10-6（ppm）vol
Response Time：95% of the response to no more than 10 seconds
Warm-up Time：8 min（May the preheating 3min urgent examination）
Output Mode：Digital direct-reading show that gases can be attached printer name, the
concentration maximum, average and minimum test time, date, etc.. Can be attached to interface with the computer network
Environmental conditions：Temperature 0 ~ 40 ℃, relative humidity ≤ 90%
Power：AC100-240V  50Hz or DC12V (select plus power inverter) Power
consumption 50VA
Dimensions：420mm (length) × 310mm (width) × 170mm (H)
Weight：About 9kg

4.摩托車排氣分析儀NTP1-HPC211

主要功能特點：
　　分體式結構設計，操作方便，按新國標GBl9758-2005技術要求研制；
　　采用內置全流式取樣技術，測量摩托車急加速、怠速工況時的煙度；
　　高亮度數碼顯示，進口關鍵零部件組裝而成；
　　采用全流式耐高溫的特殊取樣探頭，采樣穩定、精確、方便；
　　丌機預熱時間10分鐘，并自動調零；
　　數據自動線性化處理，可顯示不透光度N、光吸收系數K；
　　出現故障時自動顯示故障代碼；
　　附有自動時鐘顯示，內置打印機(RS—232或模擬接口聯網)供選擇。
主要技術參數：

測量范圍              不透光度N:  0～100%

   光吸收系數K:0～90.65m^-1

示值誤差              ≤±2%

穩定性                自動校零，量矩漂移≤±1%/4h

分辨率                0.1%

響應時間              1S±0.1S

輸出方式              LED(4位)顯示，可附打印機，打印出5組急加速煙度、怠速

                      煙度、光吸收系數的zui大值及平均值，測試時間、日期等，

                      可附接口與計算機聯網

環境條件              溫度0～40℃，相對濕度≤90%

電源                  AC100-240V   50Hz 消耗功率150VA

外形尺寸              控制箱：250mm(長)×310mm(寬)×170mm(高)

                      煙道箱：250mm(長)×170mm(寬)×170mm(高)

重量                  控制箱：4kg，煙道箱：5kg

Main Features:

◆Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
◆With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
◆High-brightness digital display, import key components assembled.
◆Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
◆Ji machine warm-up time 10 minutes, and automatic zero adjustment.
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
◆Fails automatically displays fault code.
◆With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.

Main technical parameters:

Test Scope：No light transmission N: 0～100% 

Light absorption coefficient K: 0～90.65 m-1Shows the value error：≤ ± 2%Stability：Automatic zero, volume moments drift ≤ ± 1% / 4hResolution：0.1%Response Time：1S ± 0.1SOutput Mode：LED (4-bit) display can be attached to the printer 5 groups hard phases    

of acceleration smoke, idle smoke, the light absorption coefficient of

the maximum and the average test time, date, etc., can be attached to

interface with the computer network
Environmental conditions：Temperature 0 ~ 40 ℃, relative humidity ≤ 90%
Power：AC100-240V  50Hz Power consumption 150VA
Dimensions：Control Box: 250mm (length) × 310mm (width) × 170mm (H)
            Flue Box: 250mm (length) × 170mm (width) × 170mm (H)
Weight：Control box: 4kg, flue box: 5kg

5.汽車排氣分析儀NTP1-HPC201

主要功能特點：
　　

    用于測量汽車排放廢氣中的HC及CO氣體濃度，采用國外*技術，進口關鍵零部件組裝而成。具有高亮度數碼顯示，自動校零，自動數據線性化處理，氣路阻塞時自動報警，故障時自動診斷所在單元，打印測試之日期、時間功能，配內置打印機（或模擬輸出接口或RS－232A數字串行通信接口），可進行自由怠速和雙怠速測量，具有操作方便，測量數據準確，工作穩定可靠等特點。
主要技術參數：

測量范圍              HC：0～10000×10^-6（ppm）vol

   CO: 0～10   ×10^-2(%)vol

示值誤差              HC±12  ×10^-6（ppm）vol(誤差）或±5%（相對誤差）

   CO±0.06×10^-2(%)vol    (誤差）或±5%（相對誤差）

穩定性                自動校零，量矩漂移≤±3%

重復性                重復誤差≤±2%

分辨率                HC：1×10^-6（ppm）vol

                      CO: 0.01×10^-2(%)vol

響應時間              95%響應不大于10秒

預熱時間              8min（可預熱3min應急檢測）

輸出方式              數字直讀顯示，可附打印機打印氣體名稱，濃度zui大值、平

                      均值、zui小值，測試時間、日期等。可附接口與計算機聯網

環境條件              溫度0～40℃，相對濕度≤90%

電源                  AC100-240V 50Hz 或DC12V（選加電源逆變器）

                      消耗功率50VA

外形尺寸              420mm(長)×310mm(寬)×170mm(高)

重量                  約9kg

Main Features:

Used to measure vehicle emissions of HC and CO gas concentrations, using advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with easy operation, accurate measurement data, work stable and reliable characteristics.

Main technical parameters:

Test Scope：HC：0～10000×10^-6（ppm）vol

CO：0～10  ×10^-2(%) vol

Shows the value error：HC ± 12×10-6（ppm）vol (absolute error)or± 5% (relative error)

CO± 0.06×10^-2(%) vol   (absolute error)or± 5% (relative error)

Stability：     Automatic zero, volume moments drift ≤ ± 3%
Repeatability： Repeat error ≤ ± 2%
Resolution：   HC：1×10^-6（ppm）vol

CO：0.01×10^-2(%) vol

Response Time：95% of the response to no more than 10 secondsWarm-up Time：8 min（May the preheating 3min urgent examination）Output Mode：Digital direct-reading show that gases can be attached printer name, the

concentration maximum, average and minimum test time, date, etc.. Can be attached to interface with the computer network

Environmental conditions：Temperature 0 ~ 40 ℃, relative humidity ≤ 90%
Power：AC100-240V  50Hz or DC12V (select plus power inverter) Power

consumption 50VA
Dimensions：420mm (length) × 310mm (width) × 170mm (H)
Weight：About 9kg