[ 主要用途 ]
Main Application
  MY型結晶、過濾、洗滌、干燥器廣泛應用于制藥、化工、食品等行業的懸濁液、結晶液的固液分離-洗滌-干燥。四個工藝過程在同一設備內連續完成。
  This machine will be wildly applied to solid-liquid separation,washing and drying for suspended substance solution and crystalling solution in medichine,chemical,food industry.Four steps（crystalling;filtration;washing and drying）will be finished in same equipment.

 
[ 工作原理 ]
Working Principle
  MY型結晶、過濾、洗滌、干燥器的工作原理是在懸浮液進料，通過抽濾或壓濾使母液通過過濾介質達到固液分離的目的，通過CIP裝置噴灑洗液實現濾的泡洗或淤漿洗滌，再次分離母液后，用攪拌槳逐層刮起濾餅，通過設備的側壁、底盤上的濾板和攪拌槳對物料加熱，并在升降攪拌下實現動態常壓或真空干燥，zui后由自動出料閥自動將干燥物排出。
 
  We add the suspended substance solution in this machine and make mother liquid go through the filtering media to separate the sold and liquid by attract filtering or press filtering.CIPwill spray washing solution to wash the separated solid or sludgy.After mother liquid separation again,the stirrer will rotate to make filtering cake loose.Hear the material through inner wall;filtering palate;and stiring oar.Dry the material under centain pressure or by vacuum drying.Finally the automatic valve will discharge the material out after drying.

[ 主要特點]
Main Characteristic
* 全封閉狀態下進行工藝操作，潔凈環保。
* 工藝物料不需要轉移即可完成各個工藝操作，省時、省工、無污染、無物料損失。
* 多用途攪拌設計，適合各步工藝操作。
* 金屬燒結板過濾介質，高精度、無磨損、規格全、不用予過濾。
* 全位置加熱設計，傳熱效率高，溫度控制精確，物料安全可靠。
* 變頻調速，液壓傳動，運行平穩，無噪音。
* 無菌設計，在位取樣，*符合GMP
* 自動出料，直接包裝
* 系列產品，規格齊全
* PLC現場操作控制，簡單方便
* 人機界面，實現集中控制
* 防爆產品，安全可靠

To operater under fully enclosed condition.working area is clean and the environment will be protected.
Four proeessing steps will proceed in same machine.It will save time and laborer and no pollution and material loss will occur.
Multi-purposed stirring designing will fit to several processing operation.
The filreting metal plate will have following characteristies,high accuraoy,no abrasiver,with different specification,no pretreatment will be needed.
The fully heating design:high heating efficieccy,accurate temperature controlling,material will be safe and dependable.
Under changing turning speed by varying frequency and hydraulic transmission,it will works calmly without any noise.
No bacteria invasive design and sample taking at certain place completery meet°∞GMP° ±
To discharge the material automatically and pack. Product in series and with different specification.
To control the site operation by PLC.It is simple and convenient.
Interface between operator and machine and centralized control.
Anti-explosive products safe and dependable.

[ 主要技術參數 ] TYPE AND MAIN TECHNICAL PARAMETERS