TheDacellDN-100andDN-200havedesignedspecificallytooperatewithstraingaugesensorssuchasFast-measurementofLoadcell,Torquemeters,PressureTransducer,LVDT,etc.該產品為需要特殊操作的應變計傳感器設計

詳細介紹

The Dacell DN-100 and DN-200 have designed specifically to operate with strain gauge sensors such as Fast - measurement of Load cell, Torquemeters, Pressure Transducer, LVDT, etc.

該產品為需要特殊操作的應變計傳感器設計，如快速稱重傳感器，扭矩傳感器，壓力傳感器，LVDT等，安裝簡單、快速，僅使用四個按鈕的快速操作。

DN100 : sampling speed : Appr. 5000Times Per Second

DN200 : sampling speed : Appr. 1000Times Per Second

High resolution
High precision and stability
Quick sampling speed
UNIT CONVERSION : kg, N, ?b, kg/?, bar, MPa
Display part and analogue zero by auto zero(DAC)
Relay output : Hi, Low, NG, OK.
Watch dog
Calibration of actual load and sensor output value
Peak & sample hold, Average hold

參數	DN100	DN200
應用傳感器	Strain guage sensors
傳感器供電電壓	DC 5V, 4個傳感器 (350Ω)
零點調整范圍	00%F·S (Auto Zero)
輸入范圍	0.5 - 3mV/V
顯示	-19999 - +99999
字符高度	7Segment 14mm & 10mm
小數點	Random setting available
A/D converter	16bit 5000 times/sec	24bit 1000 times/sec
D/A converter	16bit 1000 times/sec	16bit 1000 times/sec
繼電輸出	Contact capacity : AC250V 5A , Relay life time : more than 5,000,000 times
零點偏差	Within 0.5μV/℃
靈敏度變化	Within 0.01%/℃
電壓輸出	DC 0 - 10V (4-20mA : in accordance with customer request)
使用溫度范圍	-10℃ - 60℃
濕度	Less than 80% RH (no dew condensation)
電源	AC 85 ~ 265V 50/60Hz
選配	Weight: 1000g
	OP-01 : BCD output
	OP-02 : RS232C serial interface
	OP-03 : RS485 Multi drop interface
	OP-04 : RS422A serial interface
	OP-06 : Power 24VDC