傳感器信號放大器是將傳感器輸出信號進行精密放大，線路內部進行穩壓、恒流供橋、電壓電流轉換，阻抗適配，線性補償，溫度補償?shù)龋瑢⒘W(xué)量轉換成標準電流、電壓信號輸出

詳細介紹

美國Transducer Techniques TMO-2集成放大器和信號調理儀功能，用于信號源和讀出設備之間的信號調理器件，如衰減器、前置放大器、電荷放大器以及對傳感器或放大器進行非線性補償?shù)碾娖睫D(zhuǎn)換器件。

Transducer TMO-2傳感器模塊是一款差分放大器/信號調節器，價格好，性價比高。并提供激勵，結算和滿刻度校準功能。

The TMO-2 Transducer Modules is a complete differential amplifier/signal conditioners with self contained power. The units provide excitation, balance and span adjustment via precision 10 turn pots, and shunt calibration necessary to couple a user supplied bridge type transducer to an indicating instrument. Full scale output is specified at plus or minus 10 VDC. The TMO-2 provides a floating shunt calibration circuit which applies calibration at the transducer, thereby eliminating errors due to line losses. The excitation supply incorporates a Wagner Ground to greatly improve Common Mode Rejection. The factory set bandwidth of the module is narrow to improve stability for applications such as weighing scales. The removal of a single capacitor will increase the frequency response DC to 60K Hz for dynamic data applications.

詳情請聯系我們

SIGNAL CONDITIONER

Type: Full external bridge

Sensor Resistance: 120 to 1000 ohm

Balance Range: ±30% of output (350 ohm

bridge)

Shunt Calibration: Single point momentary

Calibration Value: 1 mV/V resistor provided

BRIDGE AMPLIFIER

Type: Bipolar differential

Gain Range: 67 to 737

Input Sensitivity: 1 mV/V to 10 mV/V

Input Impedance: 10 Megohm minimum

Output Voltage: 0 to 10 Volts (2 mV/Vspecs)

Output Current: 0 to 10 mA

Output Impedance: 75 ohm

CMR: 110 db minimum, DC to 60 Hz

Noise and Ripple: Less than 3 mVP-P

Nonlinearity: .01% maximum

Accuracy: ± .05% of FS

Type: Low pass, 6 db, octave

Frequency: 16 Hz standard (160 and

1600 Hz available)

EXCITATION SUPPLY

Type: Constant voltage

Output: 8 VDC ± .25V

Output Current: 0 to 120 mA

Current Limit: Factory set at 65 mA

Load Regulation: .1% maximum for 99%

load change

GENERAL

Balance Stability: .2% for 8 hours

Gain Stability: .01% for 8 hours

Tempco: .02% full scale/°C

Isolation: 1000 Megohm, output to AC

Operating Temp: 0 to 50°C

Size: 3 x 3.75 x 6.25 inches

Weight: Less than 2 lb approx.

Fuse: 250 mA internal

Power: 115 VAC 10% 60 Hz 3 Watts

訂貨型號

Order Code Model Capacity Range Calibration Description

TM0-2 N/A 120 VAC Conditioner Module 16 Hz Filter

TM0-2-160 N/A 120 VAC Conditioner Module 160 Hz Filter

TM0-2-1600 N/A 120 VAC Conditioner Module 1600 Hz Filter

相關型號

TMO-2A

LCA-9PC

LCA-RTC

DPM-2

TMO-2 01.png

以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工機械設備網對此不承擔任何保證責任。溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。