粉碎設備 混合設備 分離設備 濃縮結晶設備 傳質設備 干燥設備 反應設備 換熱設備 制冷設備 空分設備 儲存設備 鍋爐|加熱設備 包裝機械 輸送設備 化工實驗室設備
深圳市漢斯福特科技有限公司
深圳市漢斯福特科技有限公司
張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器
張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器。張力儀有機械式和電子式兩種，測量張力的單位用牛頓/厘米表示。張力也可以用相對數值來表示。厘米張力儀就是用相對數值表示張力的一種，是通過張力儀自身重量使絲網下沉的深度的數值(毫米)來計算，張力數值可從指示盤上直接得到，或者從控制盤上間接得到。張力儀有手工操作和機械操作兩種。張力儀是檢驗絲網印版質量的重要的檢測儀器。為保證得到制版要求的張力，在繃網過程中或繃網后都要使用張力儀測量。
德國Honigmann專注于卷材張力檢測和張力控制有超過60年歷史，是大張力測量儀表生產商。旗下產品張力計Honigmann RTM-20D-2，用于大尺寸纜索和超大張力的測量應用，例如幕墻拉索。
大量程鋼索/鋼繩拉力計
Honigmann RTM-20D-2 - 2,200 lb
Honigmann RTM-20D-5 - 11,000 lb
Honigmann RTM-20D-10 - 22,000 lb
Honigmann RTM-20D-20 - 44,000 lb
Max Cable Diameter - 1.5" (38.1mm)
The RTM 20D is a cable tension meter specially developed for the determination of (high) tension in cables like guy wires, support cables, architectural cables etc. The RTM 20D can be placed directly on the cable. De device will show the tension on the display.
The RTM is very simple and handy to use. Simply hold and "clip" it to the rope to be tested and use the large hａnd screw to deflect the rope to a fixed angle. The resultant force will then affect the load cell and measure the tension in the wire rope. The resultant signal is then digitally processed and displayed in a graduation selected and pre programmed. The RTM 20D can display kN, klbs or in ton.
The RTM 20D is suitable for measurements up to 44,000 Lbs (22 tons) and cable diameters up to 1.5". De measured values are directly shown on the display without use of a reference table.
Measuring principle:
The RTM is placed on the cable under a predefined angle. This angle is then used to determine the tension in the cable. Since the gauge is calibrated to the cable that is measured it will directly show the tension value. These calibrations can be saved inside the gauge and it is possible to save up to 10 different cable calibrations. Values can be displayed in N or Lbs
Safety:
The RTM 20 determines quickly, safely, accurately and conveniently cable tension. It can withstａnd force two times its rated capacity without damage. The RTM features hardened steel cable guides which ensures trouble free operation in the toughest outdoor environments.
RTM 20 D can be calibrated for up to 10 different wire ropes
The RTM 20 D will temporarily withstａnd 99% overload without impairing accuracy
Pressure tight, conforms to IP 67 according to IEC 529
Tempered jaws minimize wear and maintain accuracy
The RTM-20D can display measurement in klb, kN or metric ton, user selectable.
10 different cable calibrations can be stored at one time
Accuracy | 2 - 6% of instrument capacity |
Measuring Range | 2,000 to 44,000 lbf (4 Models) |
Cable Diameter | 0.25" - 1.5" (6.35 - 38.1mm) |
Calibration | Up to 10 Calibrations can be stored |
Display | LCD, 0-19999, 0.5" high |
Power | 9V battery |
Battery Life | 25 hours |
Housing material | Corrosion proof anodized Aluminium |
Dimensions | 5.3" x 15.0" x 27.0" (135 x 380 x 685 mm) Gauge |
Weight | 13.67 lb |
Working Temp | -4 to 158° F |
Protection Class | IP67 (Dust and temporary water immersion) |
配件
RTM-ADDCABLE | Additional cable calibration for RTM 20D |
訂貨型號
RTM-20D-2 RTM-20D-2 Cable Tension Meter 0 - 2 tons (including one cable calibration)
RTM-20D-5 RTM-20D-5 Cable Tension Meter 0 - 5 tons (including one cable calibration)
RTM-20D-10 RTM-20D-10 Cable Tension Meter 0 - 10 tons (including one cable calibration)
RTM-20D-20 RTM-20D-20 Cable Tension Meter 0 - 20 tons (including one cable calibration)
相關型號
133-33
136-3
136-3E
CTM2
CBM
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
化工機械設備網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
