粉碎設備 混合設備 分離設備 濃縮結晶設備 傳質設備 干燥設備 反應設備 換熱設備 制冷設備 空分設備 儲存設備 鍋爐|加熱設備 包裝機械 輸送設備 化工實驗室設備
上海祥篆機械制造有限公司
上海祥篆機械制造有限公司
重錘式破碎機，滿足破碎石料一次成型，無需二次破碎整形國產，可以降低成本40%左右，耗能低，投資少
重錘式破碎機，滿足破碎石料一次成型，無需二次破碎整形國產，可以降低成本40%左右，耗能低，投資少。廣泛應用于礦山、冶鐵、建材、公路、鐵路、水利和化學工業等眾多行業。特別適用于破碎石灰石及抗壓強度低于200mpa中等硬度的石料，如石灰石、黃崗巖、大理石、玄武巖、鐵礦石、河卵石、頁巖、青石、煤炭、鵝卵石、建筑垃圾等。
The heavy hammer crusher can meet the requirements of one-time forming of crushed stone withoutsecondary crushing and shaping. It can reduce the cost by about 40% with low energy consumption andless investment. It is widely used in mining, iron smelting, building materials, highway, railway, waterconservancy, chemical industry and many other industries. Itis especially suitable for crushing limestoneａnd medium hardness stone with compressive strength less than 200MPa, such as limestone, granite,marble, basalt, iron ore, river pebble, shale, bluestone, coal, cobble, construction waste, etc.
工作原理/working principle
重錘式破碎機的主要工作部件為帶有錘子(又稱錘頭)的轉子。轉子由主軸、圓盤、銷軸和錘子組成。電動機帶動轉子這破碎腔內高速旋轉。物料自上部給料口給入機內，受高速運動的錘子的打擊、沖擊、剪切、研磨作用二粉碎。在轉子下部，設有篩板、粉碎物料小于篩孔尺寸的粒級通過篩板排出，大于篩孔尺寸的粗粒級阻留在篩板上繼續受到錘子的打擊和研磨，最后通過篩板排出機外。
The main working part of heavy hammer crusher is the rotor with hammer (also known as hammerhead). The rotor consists of spindle, disc, pin and hammer. The motor drives the rotor to rotate at highspeed. The material is fed into the machine from the upper feeding port, and is smashed by the impact,impact, shearing and grinding of a high-speed hammer. In the lower part of the rotor, there is a sieveplate. The particle size of the crushed material smaller than the size of the sieve hole is dischargedthrough the sieve plate, and the coarse particle size larger than the size of the sieve hole is retained on thesieve plate to continue to be hit and ground by the hammer, and finally discharged out of the machine through the sieve plate.
產品優勢和特點/Product advantages and features
1、進料口大、破碎腔高、適應物料硬度高，塊度大，產品石粉少;
2、采用高錳鋼和高鉻鑄鐵材質，產品耐磨性強;
3、入料粒度大，出料粒度大，變多級破碎為一級破碎;
4、篩板控制出料、成品粒度均勻。
1. It has large feeding port, high crushing chamber, high hardness, large lumpiness and less stone powder;
2. Made of high manganese steel and high chromium cast iron, the product has strong wear resistance;
3. The feeding particle size is large, the dischargingparticle size is large, and the multi-stage crushing is changed into the first stage crushing;
4. The sieve plate controls the discharge and the finished product has uniform particle size.
產品參數/Product parameters
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
化工機械設備網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
