ABB DSQC355A 3HNE00554-1機器人配件
1.產 品 介 紹
品牌：ABB
型號：ABB DSQC355A 3HNE00554-1
產品說明：機器人配件
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
ABB DSQC355A 3HNE00554-1機器人配件說明這些電纜的一端有一個直角24針連接器，另一端有一組剝線端。這兩條電纜相同，只是連接器方向相反。電纜連接器方向的這種差異是為了匹配32點I/O模塊的雙連接器類型上的相反連接器方向。這24芯電纜中的每個導體的額定電流為1.2安培。如果將這些電纜與具有較高輸出電流額定值的16點輸出模塊一起使用，則負載電流額定值必須使用較低的值1.2。如果現場設備需要1.2安培以上的電流，請勿使用TBQC組件。使用標準接線板。應用這些電纜用于帶有富士通24針用戶I/O連接器的90-30系列I/O模塊。這些模塊有兩類：ABB DSQC355A 3HNE00554-1電纜用于模塊左側連接器（前視圖），ABB DSQC355A 3HNE00554-1電纜用于模塊右側連接器。模塊的右側連接器與I/O電路組A和B連接；模塊的左側連接器與C組和D組連接。參見第7章“輸入和輸出模塊ABB DSQC355A 3HNE00554-1
Description These cables each have a right-angle 24-pin connector on one end and a set of stripped wire ends on the other. These two cables are identical except for their opposite connector orientations. This difference in the cables’ connector orientations is for the purpose of matching the opposing connector orientations on the dual-connector type of 32-point I/O modules Each conductor in these 24-conductor cables has a current rating of 1.2 Amps. If using these cables with a 16-point Output module with a higher output current rating, you must use the lower value of 1.2 for the maximum load current rating . If you have field devices that require more than 1.2 Amps, do not use a TBQC assembly. Use the standard Terminal Board instead.Applications These cables are for use with Series 90-30 I/O modules that have the Fujitsu 24-pin user I/O connector. There are two categories of these modules:TheABB DSQC355A 3HNE00554-1 cable is for the modules’ left side connector (front view), and the ABB DSQC355A 3HNE00554-1 cable is for the modules’ right side connector. The modules’ right side connector interfaces with I/O circuit groups A and B; the modules’ left side connector interfaces with groups C and D. See Chapter 7, “Input and Output Modules
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司，轉載請附上此鏈接:
